Tag Archive for LED

Brandon Medical’s Coolview HD-LED “are a great improvement” for Newcastle University

March 16, 2013 admin Uncategorized

PRLog (Press Release) – Mar. 15, 2013 – LEEDS, West Yorkshire, U.K. — The Newcastle University School of Dental Sciences is renowned for providing the best clinical training facilities for undergraduate and postgraduate students and has chosen Brandon Medical to provide new HD-LED examination lighting to the Clinical Simulation Unit (CSU).

This presented an unusual challenge for Brandon Medical as it was questioned whether it would be possible to replace or upgrade the existing Halogen lighting system. It was also important to the CSU to have low level and not ceiling mounted lighting to enable the viewing of the wall mounted training screens.  

Brandon Medical’s Coolview HD-LED examination light was chosen and mounted directly onto the work bench. The long reach of Brandon Medical’s ‘LX’ spring balanced arm system allowed the positioning of the lamp head to best suit the procedure. The replacement of the lights has provided a significant improvement in the amount of lighting available in the working area, an increase of 64%. This lighting can be altered from 5% – 100% intensity and also provides excellent colour corrected light which provides accurate representation of the full colour spectrum.

There was also an unforeseeable benefit of upgrading the examination lights to an intensity adjustable LED light source. When the students are working with composite filling material, it’s important that the material remains pliable during the restoration as this enables adjustments to be made before curing with a specially designed UV light source. The intensity of older halogen lights could not be adjusted, heating the material which causes the composite to set prematurely. The new LED light source intensity and colour temperature can now be adjusted giving the students more working time, where the composite remains malleable.

Diane Anderson – Nurse Coordinator at the School of Dental Sciences commented:

“Newcastle School of Dental Sciences are continually updating and improving our teaching and training facilities. The new LED lights have made a massive difference to the Clinical Simulation Unit.

The students and staff are very satisfied with the lights and they are a great improvement for the CSU. The manoeuvrability of the lights and positioning of the lamp head allows greater visibility when working on the phantom heads so students can actually see what they’re doing. Brandon Medical gave excellent guidance and advice when helping us to choose the lights and this was followed through to after sales and installation.”

For further information please contact: Brandon Medical Co Ltd T: 0113 277 7393
E: enquiries@brandon-medical.com or please visit www.brandon-medical.com

Article source: http://www.prlog.org/12099565-brandon-medicals-coolview-hd-led-are-great-improvement-for-newcastle-university.html

No comments , , ,

Innovative LED Technology Aids Design Of The Most Energy Efficient Light Bulbs On Market

February 12, 2013 admin Uncategorized

Sedna LED GU10 LED lamp.PRLog (Press Release) – Feb. 12, 2013 – Cardiff, UK – Sedna LED Ltd have teamed up with reputable international lighting manufacturer, Digilamp Europe, to optimize the use of innovative LED technology. In doing so, they have gained exclusivity and can now provide one of the most energy efficient light bulbs on the market – the LED GU10.

How does this technology work?

Nathan Edwards, Managing Director at Sedna LED Ltd said: “Unlike ordinary incandescent bulbs, our LED GU10 doesn’t get very hot and it doesn’t have a filament that will burn out. This guarantees an extremely long lifespan, with many bulbs such as this LED GU10 lasting up to 30,000 hours.”

With LEDs, a much higher percentage of the electrical power is going directly to generating light, not heat, which cuts down on the electricity demands considerably.

Its retrofit design guarantees straight-forward replacement of former energy-wasting light bulbs. And with a rare lumen output of up to 320, this GU10 LED lamp ensures maximum brilliance – in both senses of the word.

Full spec: Up to 320 lm, ideal replacement for 50W incandescent bulb with similar ambiance; Only 5W – up to 90% energy savings and reduced carbon emissions: 30,000 hour rate life lasting 10-15 times longer than a standard bulb; Beam angle: 100° (others available on request); 2 Year warranty; Available in Warm White (3200K) or Natural White (4200K)
http://www.sednaled.co.uk/led-lamps/lamps-gu10-12708.html

Sedna LED Ltd are suppliers of LED lighting products, both direct and to the trade. All products are manufactured to the highest specifications, using high quality LEDs and materials, and all have full CE, RoHS WEEE approvals where applicable. We pride ourselves on having the largest stock quantities, at the best trade prices where we supply the European market from our distribution centre in Cardiff, UK.      

02920 099 092 / http://www.sednaled.co.uk / info@sednaled.co.uk
Unit 21 Cardiff Business Technology Centre, Capital Business Park, Wentloog Avenue, Cardiff, CF3 2PX

Photo:
http://www.prlog.org/12078304/1

Article source: http://www.prlog.org/12078304-innovative-led-technology-aids-design-of-the-most-energy-efficient-light-bulbs-on-market.html

No comments , , ,

Christie Projects Far into the Future at ISE 2013

January 30, 2013 admin Uncategorized


AMSTERDAM, Jan. 29, 2013 /PRNewswire/ — ISE — As a founding ISE exhibitor, Christie® will again occupy a large, and intuitive multi-zone site at ISE 2013. A must-see display, it boasts a brand new projection mapping facade created especially for ISE.

There will be heavy focus on market education and the stand will incorporate a technical service meeting space and dedicated seminar theatre. This will be flanked by videowall and MicroTiles Interactive zones, the presentation space for a new outdoor LCD flat panel LCD and a 1-chip DLP® gallery.

These interlinked zones will address a myriad of market segments including corporate boardrooms, higher education, rental staging, broadcast, virtual reality and advanced control room environments. Examples of 3D video mapping will come alive, driven by Christie J Series projectors and Christie Nitro integrated moving yokes for big canvas statements.

Several new technologies will be showcased, including Christie Phoenix – a networked information management platform utilising companies’ existing network infrastructure – and fully collaborative visual solutions for mission-critical control room monitoring.

This is just one unique solution with which Christie will be looking to consolidate its position in the control room sector. It will also show the new Christie Entero™ HB Display Cubes – the brightest LED projectors for control room use, with the world’s first Wi-Fi control capabilities. This is based on cutting-edge LED technology with over 1,000 lumens capability in illumination and wireless networking capabilities.

Addressing the growing demands of the control room, matching cutting-edge performance with lower cost of ownership, is the new Christie TVC-700 display wall processor, a powerful manager of complex information sources. Purpose-built for the rigours of 24/7 control room environments provides ample graphics and processing power to support multiple inputs and outputs.

The Christie Interactivity Kit will also feature at ISE 2013. This enables multiple users to interact simultaneously with content on the Christie MicroTiles or any large-format video wall, by transforming it into a multi-touch surface.

Another world debut will the Christie FHD551-W LCD outdoor/weatherproof flat panel, which will set the standard for outdoor LED-backlit LCD technology. Rugged and versatile, the 55-inch Christie FHD551-W is a professional HD solution designed to drive LCD flat panels and perform in harsh outdoor environments.

Christie’s premium grade, low cost of ownership 3LCD and single chip DLP projectors will be well represented throughout in their own gallery, including the new G series, which is in the running for the prestigious InAVation Award.

Around the show, Christie will provide a number of projection and MicroTiles display solutions to enhance other manufacturers’ booths, and away from the exhibition floor the company is involved in Insight Media’s MegaPixel Summit. Christie will also be sponsoring the ISE Keynote Address, presented by Marco Tempest, in The Forum at the RAI, for which a Christie Roadster HD20K-J projector will be provided.

www.christieemea.com

SOURCE Christie

RELATED LINKS
http://www.christieemea.com

Article source: http://www.prnewswire.co.uk/news-releases/christie-projects-far-into-the-future-at-ise-2013-188848751.html

No comments , , ,

Super HDR for fast acquisition of high quality images

January 21, 2013 admin Uncategorized

PRLog (Press Release) – Jan. 21, 2013 – With the first update of the DSX industrial microscope systems (http://www.olympus-ims.com/de/microscope/opto-digital/), Olympus introduces a series of options to increase image quality and ergonomics of their devices. The new Super HDR software has been developed to enhance the standard high dynamic range (HDR) function on the DSX100, DSX500 and DSX500i which combines several images taken at different exposures in order to accurately correct brightness variations on sample surfaces. The unique Super HDR function improves signal-to-noise ratio and increases acquisition speed of images. It comes in two modes; fast mode uses a speed of up to 12 frames per second to provide smooth imaging even when focusing the sample or moving the stage, while fine mode provides sharper definition with a higher signal-to-noise ratio. With these enhancements Olympus sets a new benchmark for high-resolution image quality.

Exclusive to the DSX100, new anti-halation adaptors use polarised lighting to control reflection from the LED illumination ring. This eliminates artefacts derived from the light reflection at glossy surfaces and opens up new possibilities in colour reproduction, making the detailed detection of specific areas for analysis as clear as possible. Furthermore, the DSX100 is now compatible with the DSX-UFSSU motorised stage. This enables the operator to take advantage of the full range of ergonomic automation features, such as the Macro map function which increases convenience and ease-of-use by indicating the actual observation position on the specimen in a separate low magnification view.

Olympus has also made significant improvements to 3D image quality in both the DSX100 and DSX500. The DSX100 offers highly reliable 3D visualisation while the DSX500 now creates superb 3D data which are coming close to the OLS4000 laser measuring microscope system. These upgrades allow for clear and precise 3D imaging and analysis of complex surface topologies for accurate sample measurements.
All three DSX series systems are now additionally supported for Windows 7 64 bit. For further information on all the improved features, please visit the Olympus website, www.olympus-ims.com/opto-digital.

Article source: http://www.prlog.org/12063359-super-hdr-for-fast-acquisition-of-high-quality-images.html

No comments , ,

EKTA to launch next generation LED video display screens at Integrated Systems Europe show

January 17, 2013 admin Uncategorized

EKTA installed nine giant LED screens at Ocean Plaza in KievPRLog (Press Release) – Jan. 17, 2013 – The latest in cutting-edge video display technology will be showcased at this year’s Integrated Systems Europe (ISE) show with the unveiling of two next generation LED display screens from one of Europe’s leading manufacturers, EKTA.

Exhibiting at ISE, which is being held at RAI in Amsterdam from 29-31 January, EKTA will be launching its state-of-the-art iLVM 4C-Qs LED-Wall Indoor series and LVM 6C-Q LED-Wall Outdoor series, both of which are designed and built at EKTA’s facility in Ukraine.

Further technological improvements in screen quality, brightness and resolution, as well as refinements made in their construction for increased durability, reliability and application flexibility are among the range of benefits delivered by EKTA’s innovative new screens.

Offering the ability to create an LED video wall of any size and shape as a fixed installation or mobile, whilst retaining super-sharp image quality, EKTA’s latest LED display screens and video control equipment provide the global audio-visual market with an elegant and high performance solution for all display requirements, indoor and outdoor.

Aimed at a diverse customer base, from system integrators, rental and advertising companies to modern art museums, retail centres and universities, EKTA’s next generation of LED screen products also include 3D technology to enhance the viewing experience.

Commenting on the launch of EKTA’s latest LED display screens at ISE, where EKTA is returning for the sixth time, Oleg Bogomolov, EKTA’s General Sales Manager, said:

“EKTA prides itself on being at the forefront of LED display technology and we are continually developing ways of improving the visual experience. Our brand new screens have been designed in accordance with what our customers are demanding and incorporate the very latest technology. As well as offering limitless visual effects, the screens provide numerous environmental and operational cost benefits, so we expect their improved specification will generate significant demand.”

EKTA is exhibiting on stand 11-N71 at ISE.

http://www.iseurope.org/home.php?hp=1site=event…

For further information about EKTA visit http://www.ekta-led.com

Photo:
http://www.prlog.org/12061182/1

Article source: http://www.prlog.org/12061182-ekta-to-launch-next-generation-led-video-display-screens-at-integrated-systems-europe-show.html

No comments , , ,
« Older Entries